Eton Grundig G5 - Manual (Page 20)

5 BASIC RADIO OPERATION continued
SW BAND
(meters)
E5 FREQ. RANGE
(kilohertz)
120m
90m
75m
60m
49m
41m
31m
25m
22m
19m
16m
13m
11m
2300-2495
3200-3400
3900-4000
4700-5100
5700-6500
6800-7700
9200-10000
11400-12200
13500-13900
15000-15800
17450-17950
21400-21900
25650-26150
G5 Auto-Tuning Chart
USING THE G5’s SSB (Single Side Band) FEATURE (8)
SSB enables listening to shortwave signals using the single-sideband
mode. This mode is used for a variety of signals including amateur
radio and other two-way communications, Morse code, weather-
fax transmissions and other encoded signals often referred to as
‘utility’ signals. To use SSB, turn on the SSB circuit by pressing the
SSB button. Note that SSB appears in the display (31). Tune to the
shortwave frequency of your choice. Use the tuning knob to coarse-
tune the SSB signal, then fine-tune with the –FINE+ knob (42). This
SSB circuit allows tuning of both upper and
lower sideband signals.
18
G5 OWNER’S MANUAL
shortwave international bands. With auto-tuning, after one band
has been scanned, tuning resumes in the next band (see auto-tuning
band chart, below).