ELICA EAT-E42ASX - Manual (Page 11)

11
www.zephyronline.com
14. Note: disregard this step if intending to install a in-
line blower.
Purchase and install the Internal blower (see
paragraph „Before installing the hood - Parts not
supplied“ for model reference).
15. If supplied dismounted for shipping, assemble the
lower part of the hood with the internal blower
housing:
a. Remove the grease filter (see also Care & Use
section - Charcoal filter).
b. Rest the internal blower housing on a flat surface
and thread completely the lower part of the hood
onto it.
REAR VIEW
c. Connect all cables:
d. Fasten the hood to the motor unit using 8
screws:
6 screws from the top
TOP VIEW
REAR SIDE
FRONT SIDE
2 screws from the bottom
BOTTOM
VIEW
REAR SIDE
FRONT SIDE
Inst
allation
Control
Panel
Lamps