Echo CS-271T - Manual (Page 6)

4 CS-271T
SYMBOL FORM
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
WARNING!!
Read and follow all safety
precaution in the instruction
manual
Wear eyes, ears and head
protection
Carburetor adjustment
- Low speed mixture
Oil and gasoline mixture
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
Chain brake operation
DECALS
Locate this safety decal on your unit. The complete
unit illustration found in the “NOMENCLATURE OF
PARTS” section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
Emergency stop
Choke control “Cold Start”
position (choke closed)
STOP
Contact of the guide bar tip
with any object should be
avoided
Tip contact may cause the
guide bar to move suddenly
upward and backward, which
may cause serious injury
Both of the operator’s hands
must be used to operate the
chain saw
Chain oiler adjustment
Purge pump
Hot surface
Part Number X505-002310
WARNING
Chain brake must be unlocked befre
removing or installing clutch cover. Improper
cover installation can result in serious injury
and cause severe damage to saw.
El freno de la cadena debe ser desbloqueado
antes de remover o de instalar la cubierta
del embrague. La instalación incorrecta de
la cubierta puede dar lugar a lesión seria y
causar daño severo a la sierra.
Part Number X505-002062 Part Number X505-006660
Chain oil fill
Part Number X524-003920
REPLACEMENT BAR AND CHAIN
GUIDE BAR CHAIN
PART NO. PART NO.
10” 10A4CD3740 90SG40CQ
12” 12A4CD3745 90SG45CQ
Note:
There may be other replacement
components for achieving kickback
protection. For details, please refer to
the chain and bar combination sheet
shown in the instruction manual.