Emerson EM2246 - Manual (Page 6)

CHECKING THE PACKAGE CONTENTS
As you unpack this set, make sure you have the following items in the package.
HANDSET
STRAIGHT TELEPHONE
LINE CORD
WALL MOUNT ADAPTOR
(attached to the back of the
base for wall mounting)
TELEPHONE BASE COILED HANDSET CORD
5
VOLUME CONTROL AND RINGER SETTINGS
Adjust the handset volume Slide the HANDSET VOLUME control to NORM or LOUD
Adjust the speakerphone
volume
Slide the SPEAKERPHONE VOLUME control: MIN/MAX
(on the right side of the phone).
(on the right side of the phone).
Adjust the ringer level
HI
- Rings loud on incoming calls.
LO
- Ring volume is lowered on incoming calls.
OFF
- No ringing on incoming calls.
MAKING CALLS
1. Pick up the handset or press the
speaker
button to get a dial tone.
2. Dial your call.
3. To end the call, replace the handset on the base or press the
speaker
button again.
ANSWERING CALLS
1. After the phone rings, pick up the handset or press the
speaker
button.
2. To end the call, replace the handset on the base or press the
speaker
button again.
HOLD FUNCTION
Press the
hold
button to temporarily put a caller on hold without disconnecting the call.
FLASH
Use the
flash
button for Call Waiting and Three Way Calling services.
NOTE: Call Waiting and Three Way Calling are services provided by your local telephone
company.