Echo X750-006 - Manual (Page 16)

16
M
AINTENANCE
Your ECHO blower is designed to provide many hours of trouble free service. Regular scheduled maintenance will help
your blower achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have
the ECHO Dealer do it, each maintenance task has been graded. If task is not listed, see your ECHO Dealer for repairs.
SKILL LEVELS
Level 1 = Easy to do. Most required tools come with unit.
Level 2 = Moderate difficulty. Some specialized tools may be required.
Level 3 = Experience required. Specialized tools are required. ECHO recommends
that the unit be returned to your ECHO dealer for service.
ECHO offers REPOWER TM Maintenance Kits and Parts to make your maintenance job easier. Just below each task
heading are listed the various part numbers required for that task. See your ECHO dealer for these parts.
MAINTENANCE INTERVALS
COMPONENT/
SYSTEM
MAINTENANCE
PROCEDURE
REQ'D
SKILL
LEVEL
DAILY
OR
BEFORE
USE
EVERY
REFUEL
3
MONTHS
OR 90
HOURS
6
MONTHS
OR 270
HOURS
YEARLY
Cylinder Exhaust Port Inspect/Clean/Decarbon 3 I/C
Fuel System, Leaks Replace 3 R*
Air Filter Inspect/Clean/Replace 1 I/C R*
Choke Inspect/Clean 2 I/C
Fuel Filter Inspect/Replace 1 I R*
Fuel System, Leaks Inspect 1 I I
Cooling System Inspect/Clean 2 I/C
Muffler Spark Arrestor Inspect/Replace 2 I/R*
Recoil Starter Rope Inspect/Clean 1 I/C I/R*
Spark Plug Inspect/Clean 2 I/C R*
Screws/Nuts/Bolts Inspect/Tighten/Replace 1 I/R*
Recommended ECHO Dealer Maintenance Procedures
Do-It-Yourself Maintenace Procedures
MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine the frequency
of required maintenance.
MAINTENACE PROCEDURE NOTES:
*All recommendations to replace are based on the finding damage or wear during inspection.