Extron electronic CVEQ1 AAP - Manual (Page 12)

CVEQ1, CVEQ1 WM, CVEQ1 AAP • Specifications, Parts, Accessories CVEQ1, CVEQ1 WM, CVEQ1 AAP • Specifications, Parts, Accessories
Specifications, Part Numbers, Accessories
A-3
Audio output
Number/signal type ...................... 1 stereo, balanced/unbalanced
Connectors
CVEQ1 ................................. 1 3.5 mm captive screw connector, 5 pole
CVEQ1 AAP ........................ 1 3.5 mm direct insertion captive screw
connector, 5 pole
Impedance ........................................ 50 ohms unbalanced, 100 ohms balanced
Nominal level .................................. -2dBu (632mV), balanced output
Maximum level (600 ohm) ............ > +5.5dBm, balanced or unbalanced at 1%
THD+N
General
Power ................................................ 100VAC to 240VAC, 50/60 Hz, 5 watts,
external; 12VDC, 1 A power supply. Product
requires 0.42 A.
Temperature/humidity ................. Storage -40° to +158°F (-40° to +70°C) / 10%
to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10%
to 90%, non-condensing
Rack mount ...................................... No
Enclosure type ................................. Metal
Enclosure dimensions
CVEQ1 ................................. 1.2" H x 3.5" W x 1.8" D
3.0 cm H x 8.9 cm W x 4.6 cm D
(Depth excludes connectors.)
CVEQ1 AAP
Plate ..................... 1.4" H x 3.5" W x 0.1” D
( 2.8 cm H x 8.9 cm W x 0.3 cm D) (double-
space high AAP plate)
Circuit board ...... 1.1" H x 2.7" W x 1.7" D
(2.8 cm H x 6.9 cm W x 4.3 cm D)
(Height includes connectors, but not cables.)
CVEQ1 WM
Plate ..................... 4.5" H x 2.8" W x 0.1” D
(11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang)
Circuit board ...... 2.7" H x 1.1" W x 1.7" D
(6.9 cm H x 2.8 cm W x 4.3 cm D)
(Width includes connectors, but not cables.)
Product weight
CVEQ1, CVEQ1 AAP ........ 0.2 lbs (0.1 kg)
CVEQ1 WM ........................ 0.3 lbs (0.1 kg)
Shipping weight
CVEQ1, CVEQ1 AAP ........ 2 lbs (0.9 kg)
CVEQ1 WM ......................... 3 lbs (1.4 kg)
Vibration ........................................... ISTA/NSTA 1A in carton
(International Safe Transit Association)
Listings .............................................. UL, CUL
A-2
Specifications
Video
Gain ................................................... Adjustable .... 0.5V to 2.0V ±10% (-6dB to
+6dB) with input at 1 volt
Equalization/peaking gain ........... 4.5dB max. @ 8 MHz
Bandwidth ........................................ 30 MHz (< ±0.5dB)
Differential phase error .................. 1º, 3.58 MHz
Differential gain error .................... 0.07%, 3.58 MHz
Video input
Number/signal type ...................... 1 composite video
Connectors ....................................... 1 female BNC
Nominal level .................................. 1V p-p
Minimum/maximum levels ......... Analog, 0.3V to 2.0V p-p with no offset at
unity gain
Impedance ........................................ 75 ohms
Return loss ........................................ 30dB @ 5 MHz
Video output
Number/signal type ...................... 1 equalized composite video
Connectors ....................................... 1 female BNC
Nominal level .................................. 1V p-p
Minimum/maximum levels ......... 0.3V to 2.0V p-p
Impedance ........................................ 75 ohms
Return loss ........................................ <-30dB @ 5 MHz
DC offset ........................................... ±50mV maximum with input at 0 offset
Sync
Standards .......................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain ................................................... Wired for unbalanced output: 0dB
Wired for balanced output: +6dB
Frequency response ........................ 20 Hz to 20 kHz, ±0.5dB
THD + Noise .................................... 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal
level
S/N .................................................... >86dB at output 6 dB, balanced
Stereo channel separation .............. >75dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ...................... 1 stereo unbalanced
Connectors ....................................... 2 RCA female
Impedance ........................................ >10 kohms unbalanced, DC coupled
Nominal level .................................. -10dBV (316mV)
Maximum level ............................... +6dBu, (balanced or unbalanced) at 1%
THD+N