Envision Peripherals LCD - Manual (Page 3)

2
CARING FOR YOUR LCD MONITOR
First, unplug the power cord from the wall socket
If the LCD screen is extremely dirty, clean it with a moist cloth. Use only warm
water and then wipe the monitor dry. Solvents or harsh cleaners can damage the
housing. Clean the display surface only with a soft cloth, otherwise you may
damage the display’s coating
If the monitor is only slightly dirty, clean it using a soft, dry and antistatic
cloth.
The LCD monitor’s screen surface is very sensitive. Please avoid any
contact with the surface (finger, p e n c i l , e t c . ) and be especi all y
c aut ious during transportation since jolts and shocks can cause the
screen to become scratched (always use the original packaging).
WALL MOUNTING
The monitor is shipped with the standard desktop configuration. However, you can
optionally mount the device on a wall or on a monitor swivel arm (optional accessory).
Please follow the corresponding instructions (4-hole assembly with a spacing of 4 × 4
inches (100 × 100 mm) according to the international VESA FDMI standard).