Echo SB - Manual (Page 12)

12
ASSEMBLY
WARNING
Move STOP switch to STOP position and disconnect
spark plug lead at spark plug before assembling unit.
Do not connect spark plug lead to spark plug until unit is
properly assembled, checked, and ready for use.
ALWAYS wear eye protection that meets current
ANSI Z87.1 requirements. Operators that wear pre-
scription glasses must wear appropriate protective
eyewear over glasses. For additional safety, a full-face
shield may be worn over the safety eyewear to provide
complete face protection.
If parts are missing, or if you have a problem installing
parts, contact your Echo Dealer for assistance or call
Echo Consumer Product Support at 1-800-673-1558.
For the Dealer nearest you ask your retailer or call
1-800-432-3246, or visit our website at www.echo-
usa.com
DANGER
Metal grass, weed, brush, and clearing blade edges are
extremely sharp. Accidental hand or body contact with
blade edges can result in severe cuts, even if the en-
gine is off and blades are not moving. Always wear
sturdy work gloves when handling blades. Do not allow
blades to contact any part of your body. Work gloves
do not provide protection from contact with moving
blades. Always keeps hands and body away from
moving blades.
NEVER fuel, start, or operate your unit unless it is fully
assembled, all shields and required guards are in
place, and the throttle lock-out lever and trigger are
working properly.
ASSEMBLY
Spark
Plug
Spark
Plug
Wire