Echo SB - Manual (Page 45)

45
Clearing Jams
DANGER
If the cutting head/work attachment gets jammed by an
obstruction and can’t move, the clutch allows the engine
to keep running. As soon as the obstruction is re-
moved, the cutting head/work attachment will start
moving again. To protect yourself from serious injury
when clearing jams, follow these important safety rules:
•
ALWAYS switch the unit off and disconnect the
spark plug before clearing a jam.
•
NEVER reach for or try to remove jammed material
while the engine is running.
•
ALWAYS inspect the cutting head/work attachment
after clearing a jam to make sure all jammed mate-
rial has been cleared.
•
ALWAYS make sure cutting head/work attachment
has not been damaged.
MAINTENANCE
WARNING
MAINTENANCE
Operating a poorly maintained unit can result in serious injuries to operator and others. Main-
tain unit as instructed in Operator’s Manual. Keep blades sharp and properly adjusted, and
replace broken parts immediately.
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose
objects away from all openings. Always stop engine, disconnect spark plug, and make sure
all moving parts have come to a complete stop before removing obstructions, clearing debris,
or servicing unit.
Your unit requires regular maintenance for safe operation and reliable performance. Using a
poorly-maintained unit can result in an injury caused by a part failure or other malfunction.
Follow these important safety instructions to reduce the risk of injury caused by poor mainte-
nance.
•
NEVER test for ignition spark by grounding spark plug near cylinder plug hole. A spark
could ignite fuel vapor, causing serious injury from explosion or fire.