Ericsson CF337 - Manual (Page 8)

PLACING & RECEIVING CALLS
10
Using Menus.
As you use your handset, menus can be displayed to let you perform a
wide range of important functions.
To bring up menus, press the (left or right) ARROW key and hold
down (or repeatedly press) until the menu you want is on display.
Then press
to select the menu.
For details on each menu, see your Ericsson User’s Manual.
9
Now you’re ready for the good part: how simple and satisfying it
is to use your Omnipoint handset.
Your handset can make and receive calls only when it is switched on,
has a valid SIM Card inserted and is located in the Omnipoint
coverage area or in a “roaming” network.
To make a call, just follow these simple steps.
> If your handset is off, press (on CF337, press PWR) and
hold until you hear a click. The display will light up. In a few
seconds, “OMNIPOINT” will be displayed.
> Dial the Number, just as you would from your home phone.
• If it’s in the same area code as your Omnipoint number,
enter the 7-digit number.
• If you’re calling to another area code, dial , the 3-digit
area code, and the number.
• For international calls, dial , plus the
country code, and the number you’re dialing, including
area code.
> As you dial, the number you’re dialing will appear on your
display. If you make an error while dialing, press once to
erase the last digit on your display, or press and hold to
erase the entire display so you can begin again.
> Press to put your call through. While you talk, you’ll see
the elapsed time of your call in the display.
> To end your call, press .
COYNE/40976/CC/2 10/29/96 8:39 AM Page 15