Emprex 15"wideLCD Monitor none - Manual (Page 9)

1. The following frequency range is the working period. If the entered mode between below
period but not match the frequency of supported timing, display optimization would not be
assured. If the entered mode is out of the working period, the display will be blanking
(just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.
2. Basically, mode judgment is regardless the sync polarity except both or more modes that
are all belong to the supported timing list and could be judged by sync polarity only.
3. In the meantime, real entered frequency of the supported timing is not requested exactly.
4. Normalization of VGA card’ s deviation will be acceptable.
5. Horizontal Frequency
6. Vertical Frequency
- 7 -
Technical Features and Specifications
Interface Frequency
56 ~ 76Hz
31 ~ 83KHz
Net
Net
Tilt Angle
Analog
Operating
Condition
Storage
Condition
0.2595(H) x 0.2595(V)mm
332.16(H)x186.84(V)mm
D-sub
-5°~14°
About 2.5kg
About 383.0(W)x323.7(H)x168.6(D)mm
AC
Consumption
AC 100~240V,50Hz/60Hz,1.2A
Temperature
Humidity
Altitude
Temperature
Humidity
Altitude
Active:<27W/Standby:<2W
0°C to 40°C
-20°C to 60°C
20% to 80% (No Condensation)
Under 10,000 fts
5% to 80% (No Condensation)
Under 30,000 fts
Panel
Display Size
Pixel Pitch
Connector
Tilt
Weight
Power
Dimensions
(W x H x D)
15"W
15"W
15"W
15"W
Item Description