Epson Stylus Scan 2500 - Manual (Page 4)

You’ll follow different instructions, depending on
what type of system you have:
■ Windows ® 98 with USB connection
■ Windows 95 or 98 with parallel connection
■ Macintosh ® with USB connection
Before you start, make sure you have the two CD-ROMs that came in the
box with your EPSON Stylus Scan. If you don’t have a CD-ROM drive,
contact EPSON as described in your User’s Guide.
6. Click the
Add Software button.
7. M Ma ak ke e ssu urre e
a allll iitte em mss a arre e
cch he ecck ke ed d. Then
click OK.
8. Follow the on-screen instructions to install the EPSON Smart Panel ™ .
When the installation is complete, you see the EPSON Stylus Scan Setup
window. Click
Next.
Installing Adobe ® PhotoDeluxe ® and Additional Software
1. Follow the on-screen instructions to install Acrobat ® Reader and WinFax ® .
After each installation is complete, the next one begins automatically.
D
Do on n’’tt rre esstta arrtt y yo ou urr cco om mp pu utte err u un nttiill a allll tth he e p prro og grra am mss h ha av ve e b be ee en n iin nsstta alllle ed d.
You may need to switch between the EPSON Stylus Scan 2500 software
CD-ROM and your Microsoft Windows 98 CD-ROM again.
2. If you see a message requesting a disk labeled “DLL Installations,” click
OK, click Browse, click OK, then click OK again. (You may have to highlight
the folder whose name begins with
mse in the Browse box.)
3. After WinFax has installed, click Finish to restart your computer.
Follow the instructions on the screen to configure and register WinFax.
4. Insert your Adobe PhotoDeluxe CD-ROM. Follow the instructions to accept
the license agreement and install PhotoDeluxe.
5. When you see another message asking to restart your computer, click OK.
For eFax installation instructions, see you User’s Guide.
Now you’re ready to print, scan, and copy. See your User’s Guide for instructions.
Connecting Your EPSON Stylus Scan
1. Make sure your computer is turned on.
2. Turn on the printer by pressing the Operate button.
5 . Follow the instructions in the next section to install your software.
3. Connect the square end of the USB
cable to your printer’s USB port.
4. Connect the flat end of the USB cable to
your computer’s USB port or USB hub
port. Windows detects your printer.
Connecting Your EPSON Stylus Scan
1. Make sure both the printer and computer are turned off.
Installing Your Driver Software
1. Turn on your EPSON Stylus Scan and your computer. Wait until you see the
Windows desktop icons.
IMPORTANT: If at any time you see a message that Windows has detected
your printer and asking you to install a driver, ALWAYS select Cancel. You
can’t install your printer software that way.
2. Insert the EPSON Stylus Scan 2500 software CD-ROM.
3. Double-click My Computer on your screen.
4. Double-click the Epson_ss2500 CD-ROM icon. Then double-click C Cd dsse ettu up p.
5. Click the
Add Software button.
7. Follow the on-screen instructions to install the EPSON Smart Panel.
When installation is complete, you see the EPSON Stylus Scan Setup
window.
8. Click Next.
9. Select LPT (Printer Port),
then click Next.
When installation is complete, click OK to start the EPSON Screen Calibration
utility. Then follow the instructions in the next section.
Connect the EPSON Stylus
Scan to your computer
and install the software
1. You should now see the EPSON Screen Calibration utility start window.
Click
Next.
2. Move the slider right or left until the stripes match as closely as possible.
click
OK.
3. When you see a message that setup is complete, click OK. The Acrobat
Reader installation begins. (Your computer does not restart. Don’t restart
your computer until all programs have been installed.)
4. Follow the on-screen instructions. After the installation is complete, click OK.
The WinFax installation begins. You may need to insert your Windows
CD-ROM, if you see a message requesting it. If you see a message requesting
a disk labeled “DLL Installations,” click
OK, click Browse, click OK, then
click OK again. (You may have to highlight the folder whose name begins
with mse in the Browse box.)
5. Click OK to restart your computer.
6. Insert your PhotoDeluxe CD-ROM. Follow the instructions to accept the license
agreement and install PhotoDeluxe.
7. When you see a message asking to restart your computer, click OK.
For eFax installation instructions, see your User’s Guide.
Now you’re ready to print, scan, and copy. See your User’s Guide for instructions.
If you’re using Mac ® OS 8.1, you need to
install the iMac Update 1.0 before
installing the EPSON Stylus Scan software. This update is available online from
the Apple
® web site. If you’re running Mac OS 8.5 or 8.51, Apple recommends
that you install iMac Update 1.1.
NOTE FOR iMAC ™
Connecting Your EPSON Stylus Scan and
Selecting It in the Chooser
1. Turn on the EPSON Stylus Scan by pressing the Operate button.
2. Connect the square end of the USB
cable to your printer’s USB port.
5. Click the
SS 2500
icon.
7. Turn on background
printing if you want
to use it.
8. Close the Chooser.
6. Click the icon for
the USB port
you’re using.
3. Connect the flat end of the USB cable to the USB port on your Macintosh or
your USB hub port.
4. Select Chooser from the Apple menu.
Now you’re ready to print, scan, and copy. See your User’s Guide for instructions.
Installing the Software
1. Turn on your Macintosh and make sure any virus protection programs are
turned off.
2. Insert the EPSON Stylus Scan 2500 software CD-ROM and double-click the
EPSON SS2500 CD-ROM icon.
3 . To install EPSON Personal Copy, Presto! PageManager for EPSON, and
Acrobat Reader, double-click the appropriate icon. Then double-click the
program’s installer icon and follow the on-screen instuctions.
4. When you finish installing other software, double-click the EPSON Stylus
Scan Drivers icon.
Installing Adobe PhotoDeluxe
1. Insert your Adobe PhotoDeluxe CD-ROM.
2. Double-click the Adobe PhotoDeluxe Installer icon.
3. Follow the instructions on the screen to accept the license agreement and
install PhotoDeluxe.
4. When you see a message asking to restart your Macintosh, click OK.
For eFax installation instructions, see your User’s Guide.
Follow the instructions in the next section to connect your EPSON Stylus
Scan and select it in the Chooser.
Calibrating Your Screen and Installing Adobe PhotoDeluxe
3. Plug the other end of the cable into your computer’s parallel port.
Installing Your Driver Software
Finishing the Software Installation
8
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. General notice: Other product names are for identification purposes only and may be trademarks of their respective owner. EPSON disclaims any and all rights in those marks. Copyright © 1999 Epson America, Inc. Printed on recycled paper with at least 10% post-consumer content. CPD 8874
1. Click Next, then continue clicking
Next on each window that appears.
2. If you see a message asking for your
Windows 98 CD-ROM, insert it and click
OK (or select Specify a location, click
Browse, and locate the Windows 98
source files on your hard disk drive.)
3. When you see the message that
Windows has finished installing, click
FFiin
niissh h. Windows detects a USB printer.
4. Remove the Windows 98 CD-ROM (if necessary) and insert the EPSON Stylus
Scan 2500 software CD-ROM.
5 . Repeat step 1. When you see the window shown in the next step, select
Specify a location, click Browse, and locate the Epson folder on your EPSON
Stylus Scan 2500 software CD-ROM.
6. Click Next, then follow the instructions on
the screen to complete the installation. You
may need to switch between the EPSON
Stylus Scan 2500 software CD-ROM and
your Windows 98 CD-ROM several times.
7. When you see the EPSON Screen
Calibration utility, move the slider right or
left until the stripes match as closely as
possible. Then click
OK.
8. Click Finish. Windows detects the scanner portion of your EPSON Stylus
Scan 2500.
1. Click Next, then continue clicking Next on each window that appears.
2. Make sure the EPSON Stylus Scan 2500 software CD-ROM is in your drive.
If you need to specify a location, click
Browse, and locate the Epson folder
on your EPSON Stylus Scan 2500 software CD-ROM. Then click Next and
follow the instructions on the screen.
3. When you see a message that setup is complete, click OK, then click
Finish.
4. Double-click My Computer on your desktop.
5 . Double-click the Epson_ss2500 CD-ROM icon. Then double-click C Cd dsse ettu up p.
9. Select USB, then click Next.
C ontinue with the instructions
in the next section.
If you’re using a USB hub, connect the printer to a first tier
hub, which is the hub closest to the host computer. If the
printer doesn’t work with the hub, connect it directly to a USB port on your
computer.
CAUTION
2. Plug the parallel cable into
the printer’s parallel connector,
then fasten it with the wire clips.
Connect the EPSON Stylus Scan directly to the parallel
port on your computer. Do not use a pass-through port
on a Zip ™ drive or any other accessory. Do not use the same parallel port as you
use for your Zip drive. If your computer has more than one parallel port, connect
the printer to the built-in port (LPT1). For the fastest scanning and printing, enable
your computer’s ECP/DMA mode, if possible. See your computer documentation
for instructions.
CAUTION
Before connecting the EPSON Stylus Scan to your Macintosh, you must first
install the software.
To connect the printer, you’ll need a shielded USB “AB” interface cable, not
more than 6.5 feet long.
First, you’ll connect the EPSON Stylus Scan to your computer, then you’ll
install the software.
To connect the printer, you’ll need a high-speed, bidirectional, IEEE-1284
parallel cable, not more than 6 feet long.
If you have a USB port ( Windows 98 only), we recommend using it rather
than the parallel port. See the previous section for instructions.
5. Double-click the EPSON Stylus
Scan 2500 installer icon.
6. Click Install, then follow the on-
screen instructions. When you see
a message asking for your default
paper size, select
Letter, then
click OK.
7. When you see a message asking to restart your Macintosh, click Restart.
The EPSON Screen Calibration utility starts automatically.
8. Move the slider right or left until the stripes match as closely as possible, then
c lick OK.
Your Macintosh restarts. Follow the instructions in the next section to install
Adobe PhotoDeluxe.
If you’re using a USB hub, connect the printer to a first
tier hub, which is the hub closest to the host computer.
If the printer doesn’t work with the hub, connect it directly to a USB port on your
computer.
CAUTION
If there is a ground wire at the
end of the cable, connect it to
the ground connector at the
back of the EPSON Stylus Scan.
Parallel port
USB port
Windows 98 with USB:
Making the connection
Windows 95 or 98 with parallel:
Making the connection
Macintosh with USB:
Making the connection
First you’ll connect the EPSON Stylus Scan to your computer, then you’ll
install the software.
To connect the printer, you’ll need a shielded USB “AB” interface cable,
not more than 6.5 feet long.
In Windows 98, you see this window (if you don’t see it, go to the next section):
Make sure you have your Microsoft ® ® Windows 98 CD-ROM
available. If you don’t have this CD-ROM, make sure you know
where to find the Windows 98 source files on your hard disk (for example, in the
Win 98 folder.) If you need help, contact your computer manufacturer.
Your computer will install several USB devices. D Do on n’’tt cclliicck k C Ca an ncce ell a att a an ny y ttiim me e
d du urriin ng g tth he e iin nsstta alllla attiio on n p prro occe essss..
NOTE
6. M Ma ak ke e ssu urre e
a allll iitte em mss a arre e
cch he ecck ke ed d. Then
click OK.
ss2500Poster.QX3.3 9/22/99 4:01 PM Page 2