Enviro C-10791 - Manual (Page 25)

25
Figure 33: This is how the
fire box looks with only the
grate and Optional Brick
Panels in place. The burner
has three (3) locator pins for
the logs.
Secondary Installation
L
OG
S
ET AND
E
MBER
I
NSTALLATION
:
The placement of the logs is not arbitrary. If they are positioned incorrectly, the flames can be “pinched”
and will not burn correctly. The burner (shown in Figure 33), and a few of the logs come with locator pins,
notches and ledges, which make alignment easier. Using the pictures provided, carefully set the logs in
place (see Figures 34 through 39).
NOTE: The logs are fragile and should be handled gently.
Figure 33. Empty firebox with grate and locator pins.
Figure 34. First Stage Log Set Installation.
Figure 35. Second Stage Log Set Installation.
Figure 34: The first log to be
placed is the back log. It leans
on the back of the firebox, push
it back as far back as you can.
Figure 35: The left log has two
(2) holes in it that will rest over
the two (2) locator pins pointed
out in Figure 34.