Electrolux MCD1762E - Manual (Page 35)

35 Installation
Installation
A 560 x 550 x 360
B+C 462 x 300 x 350
462 x 300 x 360
560 x 300 x 350
560 x 300 x 360
D 462 x 500 x 350
462 x 500 x 360
560 x 500 x 350
560 x 500 x 360
Position Niche size
W D H
E
D
Position A Position B
Position C
Position D
Conventional
oven
Measurements in (mm)
The microwave can be fitted in position A, B C or D:
Installing the appliance
1. Remove all packaging and check carefully for any
signs of damage.
2. This oven is designed to fit into a 360 mm high
cupboard as standard. When fitting into a 350 mm
high cupboard:- Unscrew and remove the 4 feet
from the bottom of the oven. There are 3 tall feet
and 1 short foot. Replace the 3 tall feet with those
provided in the accessory pack. Do not replace the
short foot.
3. Fit the appliance into the kitchen cupboard slowly,
and without force, until the front frame of the
oven seals against the front opening of the
cupboard.
4. Ensure the appliance is stable and not leaning.
Ensure that a 4 mm gap is kept between the
cupboard door above and the top of the frame
(see diagram).
Fixing Option 1:
Fix the oven in position with the screws provided. The
fixing points are located on the top and bottom corners
of the oven.
Fixing Option 2:
Please see the template sheet supplied with this oven.
4 mm