Echo CS-305 - Manual (Page 5)

5
DESCRIPTION
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging
restrictions, guide bar and saw chain installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or
missing parts. Use the contents list to check for missing parts.
CONTENTS
1 - Power Head
1 - Guide Bar
1 - Kick Guard
1 - Hex Head Bolt
1 - Hex Nut
1 - Saw Chain
1 - Instruction Manual
1 - Safety Manual
1 - Warranty Registration Card
1 - Limited Warranty Statement
1 - T-Wrench
1 - Echo Power Blend
TM 2-stroke oil sample
EMISSION CONTROL
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 4EXHS.0334RA DISPLACEMENT: 30.1 CC
EMISSION COMPLIANCE PERIOD : 300 HRS.
THIS ENGINE MEETS U.S. EPA PAHSE 2 EMISSION REGULA-
TIONS FOR SMALL NONROAD ENGINE. REFER TO OWNER'S
MANUAL FOR MAINTENANCE SPECIFICATIONS AND
ADJUSTMENTS.
EMISSION DATA
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying
the engine emissions output meets applicable emissions regulations, provided that approved maintenance
procedures are followed as listed in the Maintenance Section of this manual.
EPA Phase 2
The emission control system for these engines are
EM (Engine Modification).
An Emission Control Label is located on the engine. (These are EXAMPLES ONLY, information on label
varies by engine FAMILY).