Manu id (dword), Manufacturer specific – Eicon Networks Network Device 206-412-06 User Manual
Page 6
6
Manu ID (dword)
The purpose of the parameter Manu ID is to communicate a dword which identifies the
manufacturer in MANUFACTURER messages. Every manufacturer supplying MANU-
FACTURER messages should choose a unique value (such as an abbreviation of the company
name).
The manufacturer ID used by Dialogic is:
0x44444944
This information element appears in:
MANUFACTURER_REQ
MANUFACTURER_RESP
MANUFACTURER_CONF
MANUFACTURER_IND
Manufacturer Specific
The purpose of the parameter manufacturer specific is to exchange manufacturer-specific infor-
mation.
Manufacturer specific information for MANUFACTURER_REQ:
word manufacturer
command
Manufacturer specific operation requested.
struct manufacturer
command parameters
Command-dependent parameters for manufacturer request.
Manufacturer specific information for MANUFACTURER_CONF:
word manufacturer
command
Manufacturer-specific operation that was requested.
word info
Result
of
the operation according to COMMON-ISDN-API
definition of Info.
This information element appears in:
MANUFACTURER_REQ
MANUFACTURER_RESP
MANUFACTURER_CONF
MANUFACTURER_IND