Euro-Pro HYDRA STEAMER SC412 - Manual (Page 9)

Attachments
Brush for hard floors (#9).
100% white terry cloth towel can be fitted on this
brush as to absorb the dirt and protect delicate
surfaces. It can also be used on vertical washable
surfaces following the same procedure as for the
floor.
Important: Please note that bristles may break
through thin towels. We recommend that two (2)
towels, laid one on top of the other be used. This
will ensure that the brush bristles do not break
through and that the towels will be sufficiently
absorbent and retain as much dirt as possible.
Very Important: When installing the towels to the
floor brush, ensure that the towels do not cover the
front and the back of the brush. (See fig. E)
Cloth Holder
Brush Wrapped With Terry Cloth
How to fit the Towel Over the Rectangular Brush (#9)
Important: Please note that bristles may break through thin towels. If you don’t
have thick enough towels, please use 2 towels.
Fig. A Fig. B
3. Fold the towel as shown in Fig. B 1. Prepare white terry cloth towel: size 8” x 17”
2. Place the brush on top of the towel.
Fig. C
4. Fold the other side of the towel as shown
in Fig. C.
Fig. D
5. Place the corner under the cloth holder
as shown in Fig. D.
8