Ericsson EUB-9701 EXT2 - Manual (Page 13)

EUB-9701 Wireless N USB adapter
Version 1.3
13
Click on Launch Config Utilities. Notice it has many tabs for configuration
To make connection, select one AP/SSID (eg: NKSP) and click [Connect]. When the
connection works, [Connected] will appear in the left button of this tab and the
icon appears in front of the linked AP.
When the connection failed, [Disconnected] will appear. If the AP has set up the
encryption, please setup the same before you click [OK].
Click on Site Survey tab. Press Rescan. You will see several AP listed under
SSID
They denote individual access points. Click on the one you want to connect with.
Notice that if there is no security key needed, you can see that in the Encryption
status as “None”.