Eton SOUND 140 - Manual (Page 5)

SOUND 140 OWNER’S MANUAL SOUND 140 OWNER’S MANUAL

Place the ES 140 on a sturdy surface. Plug the power supply into the
rear of the ES 140. Plug the AC power cord into the power supply
and then into a standard wall outlet.
The ES 140 is intelligently designed to easily accommodate all iPods
using the Apple 30-pin connector. To configure the ES 140 for your
specific iPod size, simply place the appropriate dock insert into the
dock area. Use the insert that came with your iPod or choose one
of the three inserts provided. Now you are ready to dock your iPod.
While your iPod is docked, its battery is charging (until it is fully
charged).
Connect the supplied external AM and FM antennas by sliding the
plug over the “F” connectors on the back of the radio. To avoid dam-
age, when removing the antennas, never pull it by the cord. Always
grasp the antenna’s connector firmly and pull it straight out.
On the rear of the radio is a backup battery compartment that holds
2 AA alkaline batteries for backup of time in case of power failure.
Use only new alkaline or lithium batteries of exactly the same brand
and type. The batteries are not included.
POWER SOURCE
INSERTING THE CORRECT IPOD DOCKING INSERT
ANTENNA FOR AM AND FM
BACKUP BATTERY
SYSTEM SETUP