Extron electronic MMX VGA Series - Manual (Page 3)

Specifications are subject to change without notice.
sPeCIFICatIONs
VIDEO
Routing .............................................. 3 x 2 matrix
Gain ................................................... Unity
Bandwidth........................................... 300 MHz (-3dB), fully loaded
0 – 10 MHz: no more than +0.1dB to -0.1dB
0 – 130 MHz: no more than +2dB to -0.1dB
Crosstalk ............................................. -55dB @ 10 MHz, -45dB @ 30 MHz,
-37dB @ 100 MHz
Switching speed .................................. 200 ns (max.)
VIDEO INPUT
Number/signal type ............................ 3 RGBHV, RGBS, RGsB, RsGsBs, component
video, S-video, and composite video
Connectors ......................................... (3) 15-pin HD female
Nominal l level .................................... 1V p-p for Y of component video and S-video,
and for composite video; 0.7V p-p for RGB,
and R-Y and B-Y of component video;
0.3V p-p for C of S-video
Min./max. levels ................................. -0.5V to 2.0V p-p no offset at unity gain
Impedance .......................................... 75 ohms
Horizontal frequency ........................... 15 kHz to 145 kHz
Vertical frequency ............................... 30 Hz to 170 Hz
Return loss .......................................... <-42dB @ 5 MHz
Max. DC offset .................................... 4.0V
VIDEO OUTPUT
Number/signal type ............................ 2 analog RGBHV, RGBS, RGsB, component
video, S-video, and composite video
Connectors
MMX 32 VGA A ............................... (1) 15-pin HD female, 5 BNC female
MMX 32 VGA MTP .......................... (1) 15-pin HD female
(1) RJ-45 female for proprietary analog signals
compatible with MTP R 15HD A,
MTP RL 15HD A, and MTP RL 15HD A SEQ
receivers
Nominal l level .................................... 1V p-p for Y of component video and S-video,
and for composite video; 0.7V p-p for RGB,
and R-Y and B-Y of component video;
0.3V p-p for C of S-video
Min./max. levels ................................. 0.3V to 2.0V p-p
Impedance .......................................... 75 ohms
Return loss .......................................... <-30 dB @ 5 MHz
SYNC
Input type ........................................... RGBHV, RGBS, RGsB, RsGsBs
Output type ........................................ RGBHV, RGBS, RGsB
Input level ........................................... TTL 2.5V to 5.0V p-p, 4.0V p-p normal
Output level ........................................ TTL: 4V to 5V p-p, unterminated
Input impedance................................. 510 ohms
Output impedance.............................. 75 ohms
Max input voltage ............................... 5V p-p
Max. propagation delay ...................... 30 ns
Max. rise/fall time ............................... 4.2 ns
Polarity
MMX 32 VGA A ................................ Positive or negative (follows input)
MMX 32 VGA MTP ........................... Positive or negative (selectable at receiver)
AUDIO
Routing ............................................... 3 x 2 stereo matrix
Gain
Local output .................................... Unbal. output: 0 dB
Program output ............................... Unbal. output: 0 dB; bal. output: +6 dB
Summed output (at MTP receiver)
Unbal. output: 0 dB; bal. output: +6 dB
Frequency response ............................ 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ....................................... 0.03% @ 1 kHz, 0.3% @ 20 kHz nominal level
S/N ................................................... >90 dB, at max. output (unweighted)
Stereo channel separation ................... >76 dB @ 1 kHz
CMRR ................................................. >75 dB @ 20 Hz to 20 kHz
AUDIO INPUT
Number/signal type ............................ 3 stereo, PC level, unbal.
Connectors ......................................... (3) 3.5 mm mini stereo jacks
Impedance
MMX 32 VGA A ............................... 25 kohms bal./unbal., DC coupled
MMX 32 VGA MTP .......................... >3 kohms, bal/unbal, AC coupled
Nominal level ...................................... -10 dBV (316mV)
Max. level ........................................... +8.5 dBu, (unbal.) at 1%THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
AUDIO OUTPUT
Number/signal type
MMX 32 VGA A ............................... 2 stereo, bal./unbal.
MMX 32 VGA MTP .......................... 2 stereo, bal./unbal.
1 summed mono (L+R)
Connectors
MMX 32 VGA A ................................ (1) 3.5 mm mini stereo audio jack (unbal.)
(1) 3.5 mm captive screw connector, 5 pole
MMX 32 VGA MTP ........................... (1) 3.5 mm mini stereo audio jack (unbal.)
(1) 3.5 mm captive screw connector, 5 pole
(1) RJ-45
Impedance .......................................... 50 ohms unbal., 100 ohms bal.
Max. level (Hi-Z) ................................. >+17 dBu, bal. or unbal. at 1%THD+N
Max. level (600 ohm):......................... >+14 dBm, bal. or unbal. at 1%THD+N
NOTE: 0 dBu = 0.775 volts (RMS).
CONTROL/REMOTE — SWITCHER
Serial Control Port
MMX 32 VGA A ................................ RS-232, 9-pin female D connector
MMX 32 VGA MTP ........................... RS-232, female 3.5 mm captive screw, 3-pole
Baud rate and protocol ....................... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations
MMX 32 VGA A ................................ 2 = TX, 3 = RX, 5 = GND
MMX 32 VGA MTP ........................... 1 = TX, 2 = RX, 3 = GND
Contact closure
MMX 32 VGA A ................................ 9-pin female D connector
Output 1: 1= input 1, 4 = input 2, 6 = input 3, 5 = GND
Output 2 : 7= input 1, 8 = input 2, 9 = input 3, 5 = GND
MMX 32 VGA MTP... ......................... (2) female 3.5 mm captive screw, 5-pole
Output 1: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC
Output 2: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC
Program control .................................. Extron’s control program for Windows
®
Extron’s Simple Instruction Set (SIS ™ )
GENERAL
Power ................................................. 100VAC to 240VAC, 50/60 Hz, external,
autoswitchable; to 12VDC, 1 A power supply.
Power requirement ............................. 15 watts, product requires 0.7 A.
Rack mount ..................................... Yes, with optional rack shelf,
part #60-190-01 or #60-190-20
Enclosure type ................................. Metal
Enclosure dimensions
MMX 32 VGA A ............................ 1.75" H x 8.75" W x 3.0" D
(1U high, half rack width) 4.4 cm H x
22.2 cm W x 7.6 cm D (Depth excludes
connectors.)
MMX 32 VGA MTP ....................... 1.75" H x 8.75" W x 6.0" D (1U high, half
rack width) 4.4 cm H x 22.2 cm W x
15.2 cm D (Depth excludes connectors.)
Product weight ............................... 4.0 lbs (1.8 kg)
Shipping weight .............................. 5 lbs (2.3 kg)
Listings ............................................ UL, CUL
Compliances ................................... CE, FCC Class A , VCCI, AS/NZS, ICES
Model Version Part Number
MMX 32 VGA A 3x2 VGA & Stereo Audio .........................60-565-01
MMX 32 VGA MTP 3x2 VGA & Stereo Audio with TP Output ...60-769-01