Edimax Technology EW-7206PDg - Manual (Page 7)

Wireless LAN Access Point Connection
Chapter 2 Wireless LAN Access Point
Connection
Using Power Adapter
1. Locate an optimum location for the Wireless LAN Access Point.
The best location for your Access Point is usually at the center of your
wireless network, with line of sight to all of your mobile stations.
2. Connect the Wireless LAN Access Point to your router, hub or switch.
Connect one end of standard UTP cable to the Access Point’s LAN Port
and connect the other end of the cable to a switch, a router or a hub. The
Access Point will then be connected to your existed wired LAN Network.
3. Connect the DC Power Adapter to the Wireless LAN Access Point’s
Power Socket.
Only use the power adapter supplied with the Access Point. Using a
different adapter may damage the product.
Using PoE (Power over Ethernet)
1. Locate an optimum location for the Wireless LAN Access Point.
The best location for your Access Point is usually at the center of your
wireless network, with line of sight to all of your mobile stations.
2. Connect the Wireless LAN Access Point to your PoE adapter, router,
hub or switch.
Connect one end of standard UTP cable to the Access Point’s LAN Port
and connect the other end of the cable to a powered Ethernet port on a
PoE switch, a PoE router, a PoE hub, or a PoE adapter. The Access Point
will then be connected to your existed wired LAN Network.
The Hardware Installation is complete.
5