Emerson HD7003 - Manual (Page 4)

3
PREPARATION FOR USE
POWER SOURCES
This personal CD player is designed to operate on two alkaline “AA” batteries, or
on an optional AC adapter, not included. Attempting to operate this unit on any
other power source may cause damage to the unit and such damage is not covered
by your warranty.
INSTALLING THE BATTERIES
The battery compartment is located inside the CD player.
1.) Open the CD door locking hinge as shown and then open the CD door.
Remove the “dummy CD” transit protection card from the CD spindle and
discard it.
2.) Press the battery cover locking tab
in the direction of the arrow and
open the battery cover as shown.
Note: To prevent loss the battery cover cannot be completely removed
from the player.
HD7003_ib040703.p65 7/4/2003, 11:15 3