Electrolux LAVAMAT TURBO L 12720 VIT - Manual (Page 50)

Building-in
This appliance has been designed to
be built into the kitchen furniture.
The recess should have the dimen-
sions shown in picture A.
Preparation and assembly of the door
The machine is originally pre-
arranged for the assembly of a
door opening from right to left.
In this case it is sufficient to screw
in the hinges (1) and the counter-
magnet (6) provided with the appli-
ance, at the right level (Fig. B).
a) Door
The dimensions of the door should
be:
- width
595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the height of the adjacent furniture's base.
b) Hinges
To mount the hinges it is necessary
to drill two holes (dia. 35 mm, depth
14 mm) on the inner side of the
door. The distance between the holes
hobs fixing centres must be 416 mm.
The distance (B) from upper edge
of the door to the centre of the
hole depends on the adjacent fur-
niture's dimensions.
The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of screws for wood (2-Fig. B).
50
820 min
600 min.
600
596
41
6
176
, 5
81
8
541 195
490
160
120
90
8
515
165
A
600
4
1 2
3
6
1
2
3
5
7
8
B
35 Ø 12.5-14 depth
16-22
B
C
22+1,5
595-598
41
6
C
132984560.qxd 07/10/2005 19:07 Pagina 50