Model ei100l ionisation, Installation & placement, Technical specification – Ei Electronics Ei100L User Manual

Page 2

Advertising
background image

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice

.

Ei100C DataSht RevB

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.

+353 61 471277

Fx.

+353 61 471053

Email.

[email protected]

Web:

www.eielectronics.com

Model

Ei100L Ionisation

Installation & Placement



Alarms should be placed in accordance with the general guidelines shown in
the diagram above. These recommendations are based on the problem of
areas of “dead air” close to corners of rooms and apexes of ceilings, which
could result in the prevention of smoke reaching the smoke detector

Please consult the Instruction Leaflet supplied with the Ei100L for detailed
instructions as to how to correctly install and position the smoke detector

Important Precaution:

Do not install the actual smoke/heat
alarm itself in new or renovated
buildings until all work is completed
(including floor coverings) and the
building has been fully cleaned.
(Excessive dust and debris from
building work can contaminate the
smoke chamber and cause
problems, and it will also invalidate
the guarantee). If it must be
installed, cover it completely,
particularly around the edges, with
a dust cover (eg. a plastic bag),
until all cleaning is finished..

Technical Specification

Sensor

Ionisation, uses electrically
charged ions that will react

to smoke particles


Sensitivity:

Complies with BS 5446 Part 1:
2000

Source:

Americium 241

Airspeed:

Essentially immune to the effect

of airspeed.

Button Test:

Simulates the effect of smoke and
checks chamber, electronics and
horn.

Supply Voltage:

9V battery


Alarm:

Piezoelectric-horn
in unit

Alarm Sound Output:

85dB (minimum) at 3m

Temperature Range:

0 to 40°C

Humidity Range:

0% to 90% Relative Humidity

Fixing:

Screw fixings supplied

Plastic material:

UL94HB flame retardant

Dimensions:

140x120x45 mm

Weight:

234 gram

Warranty:

5 year (limited) warranty

Approvals:

Kitemarked to BS EN 14604:2005,
CE Approved


Specifications are subject to change

Advertising