Eaton Electrical Cutler-Hammer CA03310002E User Manual
Page 4
September 2003
4
For more information visit:
www.cutler-hammer.eaton.com
CA03310002E
NEMA Contactors & Starters
IT.
Electro-Mechanical
Contactors — Full Voltage, Non-reversing and Reversing
Contents
Description
Page
Product Family Overview
Product Description . . . . . . .
2
Standards and
Certifications . . . . . . . . . . .
2
Catalog Number
Selection . . . . . . . . . . . . . .
3
Contactors — Non-reversing
and Reversing
Product Description . . . . . . .
4
Features . . . . . . . . . . . . . . . .
4
Product Selection . . . . . . . . 5
Technical Data. . . . . . . . . . . . . . 10
Accessories . . . . . . . . . . . . . . . . 13
Auxiliary Contacts . . . . . . . . 15
Dimensions . . . . . . . . . . . . . . . . 18
Product Description
The Cutler-Hammer Intelligent Tech-
nologies (IT.) Electro-Mechanical Con-
tactor by Eaton Corporation consists of
an IT. Electro-Mechanical Contact
Block and IT. Electro-Mechanical Coil
Controller as a Full Voltage Non-
reversing (FVNR) or Full Voltage
Reversing (FVR) device. Size 00 to Size
4 Contact Blocks combined with Coil
Controllers (factory or field assembled)
are stand-alone Contactors. Only the
Size 5 Contactors have internal
factory assembled coil controllers.
Features
■
Size 00 – 5, 9 – 270A, 2 – 200 hp,
600V
■
24V DC Coil Control — safe, reliable
global standard
■
Frame width (mm): 45, 54, 76, 105,
140
■
No laminations, shading coils or
magnet noise
■
-40 to 149°F (-40 to 65°C)
operating temperature
■
No seal in auxiliary contacts
required — control wiring is not
needed between the contactor and
overload relay
■
Conformal coated printed circuit
boards for resistance to harsh
environments
■
Unique Pulse Width Modulated coil
controller minimizes coil power
consumption
■
Microprocessor-based control
■
Easily accessible mounting feet for
panel mounting
■
Meets or exceeds global standards
for EMC (Electromagnetic compati-
bility) immunity and emissions
■
Front and side mounted Auxiliary
Contacts: 1NO, 1 NC, 2NO, 2NC,
1NO/1NC and logic level
■
2- or 3-wire control
■
Built-in logic to provide either 2- or
3-wire control, eliminating the need
to provide and wire auxiliary con-
tacts to seal in and interlock the
contactor coils
■
Easy field assembly of control
wiring — plug and unplug lockable
control connector
■
DIN rail mounting for Sizes 00 – 2
■
Optional mounting plates for Size
00 – 4
■
Common accessories
■
Long-life silver nickel and silver tin
oxide contacts provide excellent
conductivity and superior resistance
to welding and arc erosion
■
Environmentally friendly materials
■
Low wattage coils and minimal heat
dissipation
Reversing Contactors
■
Includes Reversing Power Wiring
and bus bars
■
Mounting plates for Size 00 – 4
■
Exclusive internal electronic inter-
lock for reversing
■
Field installed Reversing Kits
■
Unique coil controller energizes
both forward and reverse contactors
— one control point for wiring
NEMA Full Voltage Reversing Contactor,
Size 0, Cat. No. N511BS0X3N
NEMA Full Voltage Non-reversing
Contactor, Size 0, Cat. No. N111BS0X3N