Everpure MicroGuard Pro 2 EV9637-01 - Manual

B E N E F I T S
A P P L I C A T I O N / S I Z I N G I N S T A L L A T I O N T I P S O P E R A T I O N T I P S
MicroGuard™ Pro 2 Filter
Delivers premium quality drinking water for bottleless coolers and
drinking fountains
MicroGuard™ Pro 2 Replacement Cartridge:
EV9637-01 MicroGuard™ Pro 2 Replacement Cartridge:
EV9637-01 Everpure's multi-stage filter for drinking water
applications combines membrane and carbon
block technology for superior filtration results
down to 0.15 microns
Capillary membrane filtration reduces 99.9999%
of bacteria, asbestos fibers, and cysts such as
Cryptosporidium and Giardia
Submicron filtration reduces dirt and particles
Delivers taste, odor and chlorine reduction
Reduces wear and abrasion on coolers and other
water-using equipment
Sanitary cartridge replacement is simple, quick
and clean. Internal filter parts are never exposed
to handling or contamination
Never use saddle valve for connection
Use 3/8” water line
Install vertically with cartridge hanging down
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Flush MicroGuard™ Pro 2 cartridge by running
water through filter for three minutes at full flow
Change cartridges on a regular 6 month
preventative maintenance program
Change cartridges when capacity is reached or
when pressure falls below 10 psi
Service flow rate must not exceed 1 gpm
Always flush the filter cartridge at time of
installation and cartridge change
For smaller capacity coolers and drinking water
applications
Rated Capacity: 2,200 gallons (8,330 L)
EV9637-01