Enox EVR-M750 - Manual (Page 18)

35 34
Press the REC/Stop button.
1
The red lamp will flash and the saved folder and number will be
displayed. Then, the recording will be started.
● If you press the Folder button before recording, the recording folder will be
selected and saved in the file next to the recorded file.
2
Recording while listening to FM radio
To finish recording
Press the REC/Stop button again.
● The red lamp will be off and the recording will be stopped.
To playback the recorded message
● Change to the VR mode and select the recorded file. Then, press the Play/Stop button to play it back.
(For more details, refer to the “Playing Back the Files”, page 14.)
N N o o t t e e : :
● It is recommended to use the HQ mode to record as much as possible.
The sound quality can be deteriorated when you record and playback the FM radio broadcasting.
(See page 30.)
● You may experience serious noise when recording in the area with weak reception.
Move the player or the earphone line to the better location.
Press the Menu button and pull the FF button once to select the
“AREA MODE”. Then, press the Menu button gain.
● The player will enter the Area setting mode.
1
Select the reception area using the REW/FF button and set the area by pressing the
Menu button. (The 4 countries on display were just meaned by frequency ranges. ) 2
Setting the FM radio reception area
➡ ➡
➡ ➡
● AREA KOREA: 87.5 kHz ~108 kHz, step:100 kHz
● AREA JAPAN: 76 kHz ~108 kHz, step:100 kHz
● AREA EUROPE (China, ASIA, CIS, AFRICA and East ASIA): 87.5 kHz ~108 kHz, step:50 kHz
● AREA USA (Canada, South America): 87.5 kHz ~108 kHz, step:100 kHz
Enox-Eng 7/18/03 10:54 AM Page 34