Eagle Electronics FISHEASY 245DS - Manual (Page 42)

38
Opening screen, Full Chart page, or mode. The factory default setting
has the Fish I.D. (fish symbols) turned on.
Full Chart
The unit's default page, Full Chart shows all echoes scrolling across the
full screen. The bottom signal scrolls across the screen from right to
left. The line at the top of the screen represents the surface. The bottom
depth — determined by the digital sonar — shows in the upper left cor-
ner.
If the transducer with a built-in temperature sensor is connected, a
digital display for water temperature also will be shown. This tempera-
ture display can be turned on and off.
Depth Range
When turned on, the unit automatically adjusts the depth range ac-
cording to water conditions. When in auto range mode, it always keeps
the bottom displayed in the lower portion of the screen. You can over-
ride the automatic depth range control and manually select a depth
range.
To do this, repeatedly press
MENU
until the
D
EPTH
R
ANGE
menu appears.
Press ↓ to select
M
ANUAL
, then press
MENU UP
to display the
R
ANGE
S
IZE
menu. Use the arrow keys to select a desired depth range. When you
are finished, press
PWR
to clear the menu from the display.
Fish symbols
Grayline
®
Bottom signal
Digital depth
Depth range
at bottom of
depth scale
Surface signal
Water Temp
Structure
or cover