Pellet stoves and inserts, Enviro, Ef2 & ef3 – Enviro EF3 User Manual
Page 2
S = STANDARD EQUIPMENT
O = OPTIONAL EQUIPMENT
EF2 FS EF2i FS EF 3Bi FS EF 3 Bi FPI
FEATURES
Nickel Door cover
O
O
O
O
24kt Gold Door cover
O
O
O
O
Gold Louvers
S
S S S
Large full pedestal ash pan
S S S
-
Power usage (ignitor on)
-
450W
520W
520W
Power usage (ignitor off)
250W
250W
250W
250W
24kt Gold top inset
O
O
O
O
Hopper lid handle
S
S S S
Heat exchanger
S
S S S
Fire box brick lining
S
S S S
160
cfm convection fan
(variable speed)
S
S S S
Concealed electronic control panel
S
S S S
Ignitor
-
S
S
S
Oversized surround
-
-
-
O
EF log set
O
O
O
O
Zero clearance kit
-
-
-
O
Concealed Door Handle
-
-
S
S
Mobile Home Approved***
S
S
S
S
SPECIFICATIONS
Fuel Capacity
55lbs
55lbs
55lbs
55lbs
Weight of complete unit
240lbs
240lbs
240lbs
240lbs
Btu(kW) input (on high)*
34,000 (10.0) 34,000 (10.0) 40,000 (11.7) 40,000 (11.7)
Btu(kW) input (on low)*
6,500 (1.9) 6,500 (1.9)
6,500 (1.9)
6,500 (1.9)
Area heated**
900 -1,500ft
2
900 -1,500ft
2
1,000-1,800ft
2
1,000-1,800ft
2
DIMENSIONS AT BACk OF UNIT
FPI
Width X Depth
22” X 24”
22” X 24”
22” X 24”
22” X 24”
Height
30.5”
30.5”
30.5”
22.75”
A. Front of unit on hearth
-
-
-
13”
B.Recess depth into fireplace
-
-
-
11”
Standard Surround (H X W)
-
-
-
30” X 40”
Oversized Surround (H X W)
-
-
-
33” X 46”
C. Side wall to unit
6”
6”
6”
8”
D. Back wall to unit
1”
1”
1”
-
E. Wall to corner of unit
1”
1”
1”
-
F. Floor protector (in front of unit)††
6”
6”
6”
6”
G. Top of unit to mantle
-
-
-
8”
H. Unit top to surround top
-
-
-
8”
I. Unit to mantle pillar
-
-
-
6”
ALCOVE INSTALLATION
Model FS may be installed in an alcove at
least 36” wide x 48” high x 30” deep.
***Enviro pellet appliances are approved
for mobile home installations once certain
criteria are met.
* Figures will vary considerably with individual conditions and fuel quality.
** Figures will vary considerably with floor plan, house layout and heat loss of the house.
†† Floor protector must be the full width and depth of the unit plus extend 6” in front of the unit.
Specifications are subject to change without notice. These units must be installed by a qualified dealer.
Enviro Pellet Stoves have been tested and listed by
Intertek Testing Ltd to Standards:
Approved for Sale in Europe UL-1482/ULC S627, CSAB366.2M/ULC S628
UL907/UL-127 ULC S610
33"
30"
12"
Non-Combustible Pad
19"
Recommended Framing Dimensions
Zero Clearance Units
EF2I FS GD
EF3BI FS ND
Manufactured by Sherwood Industries Ltd., Victoria, BC Canada • www.enviro.com • email: [email protected] •
Printed in Canada - June, 2008
These classic heating products from Enviro have beautifully clean lines. They are
built to the same high standards of quality and performance that you have come
to expect from all Enviro models. On ignitor models, you can turn on your heat
at the flick of a switch. Easy-to-use controls, large hoppers and ash pans make
these pellet stoves simple to operate. Form and function are blended together to
create a truly marvelous heater.
EF2 FS PD
Please share and recycle this brochure
Enviro
EF2 &
EF3
Pellet Stoves and Inserts