Epson EQUITY 386SX/20 PLUS - Manual (Page 6)

EQUITY 386SX/20 PLUS
Mouse and Keyboard
When attaching the mouse and keyboard connectors, be
to attach them to the proper connectors. Although
are physically identical, they are not interchangeable.
Installing Floppy Disk Drives
When installing a disk drive as drive B, remember to
set the drive select jumper to the second position and attach
pass-through connector on the floppy drive controller
cable to the drive, not to end connector.
the drive does function make sure that the
drive has been correctly selected in SETUP. Also check
any special drivers that may be necessary
installed correctly.
you have installed two floppy disk drives, remember that
PLUS will boot from drive B when a disk
Installing Hard Disk Drives
It is recommended a AT-type hard disk controller
be used in the Equity PLUS, if you are installing
a
drive that cannot make use of the internal hard disk
Also remember to disable the hard disk
when such a drive.
If you are having in formatting the hard disk drive,
try starting over with the Unconditional Format option in
diagnostics.
When installing a hard disk drive, be sure to consult the drive
type tables for the drive type which fits the drive you are
installing. If there is no match for your drive, use the User
drive
Software Problems
installing a copy-protected software package on the
Equity PLUS, the at If
this does not work properly, try switching to for the
installation If you are still unable to load the program at
loading at and then switching to
When using a software package that uses a as its
copy-protection try loading it at If this does
not work, enable the Auto option in SETUP.
Power-on Password
Make sure that you do not forget the Password
you set one up. If you do, it will be necessary to disable
Information Reference List
Engineering Change Notices
Technical Information Bulletins
Product Support
Related Documentation
PLUS Service
Equity PLUS Parts
PLUS User’s Guide
386SX/20 PLUS-6 3/6/91 Equity Series Computers