Sending the server status via email, Virtual ruler, Overview – Elmo EDR-X216 User Manual
Page 40
5.
Enter the Email Transmission Delay time in seconds.
6.
Enter the Sender's Name .
7.
Enter the Sender's Email Address .
8.
Complete the SMTP Server information.
' & ' ) ' ) !
To send the status of the server via email, follow these steps:
1.
Complete the above eight steps.
2.
Click Send Email in the Server Status section.
3.
Select the cameras you need to receive screen shots from Include Image Of.
4.
Enter the number of times per day to send the email in Send Email Every.
5.
Optionally enter an Email Title to describe the image.
Related Topics:
Intelliguard Setup | Communication Setup
#
) ) %
This feature allows you to measure a person's height once they are in the camera's view. During playback, you can estimate their
height by comparing them to the virtual ruler.
32 - ELMO USER MANUAL 2003G