Edimax Technology Edimax user guide Router User Manual
Page 9
Advertising
Page 5
Also, some Status and Error conditions are indicated by combinations
of LEDs, as shown below
LED Action
Condition
WAN1 LINK/ACT & 10M/100M LEDs flash alternatively.
Firmware Download in progress.
WAN1 LINK/ACT & 10M/100M LEDs flash concurrently.
MAC address not assigned.
WAN1 LINK/ACT & 10M/100M LEDs solid On
SDRAM error
WAN2 LINK/ACT & 10M/100M LEDs solid On
Timer/Interrupt error
LAN1 LINK/ACT & 10M/100M LEDs solid On
LAN/WAN error
Advertising