Epson PowerLite 850p - Manual (Page 3)

3
Introduction
Your EPSON PowerLite 7850p projector now lets you project
wirelessly from an Apple
® Macintosh ® computer equipped with an
AirPort ® or AirPort Extreme (802.11b or 802.11g) wireless network
interface. This supplement includes the following:
■ System requirements for using the new wireless software
■ Software installation instructions
■ How to set up your Macintosh for wireless projecting
■ How to connect to the projector
When you’ve finished with the instructions in this supplement, see the
User’s Guide for information about creating projector groups,
receiving e-mail alerts, or using other networking features supported
by your projector.
System Requirements
Before you install the software, make sure your Macintosh meets the
following requirements for projecting wirelessly:
■ Power Macintosh ® series, iMac, ® PowerBook, ® or iBook ® series
system
■ Mac OS X 10.2.4 or above
■ AirPort (802.11b) or AirPort Extreme (802.11g) wireless network
interface
■ At least 256MB of RAM
■ At least 128MB of free hard disk space
■ SVGA (800
× 600) or better display adapter and monitor
note
If you are using AirPort
Extreme, you must set the
Wireless mode to
802.11b
only in the AirPort ® Admin
Utility. See your AirPort
documentation, or contact
Apple technical support for
help.