Extron electronic IR 501 - Manual (Page 4)

IR 501 Small Matrix Remote Control • Operations IR 501 Small Matrix Remote Control • Operations
Operations
7 6
View ties
View a tie by input selection
1 . Press the INPUT button to specify an input to view the tied
output(s). The switcher's Video LED and Audio LEDs light.
To view video and audio ties, skip step 2.
2 . If desired , specify video-only or audio-only to view:
a . To view video-only tie(s) , press the VIDEO button.
The switcher's Video LED remains lit and the Audio
LED goes off.
b . To view audio-only tie(s) , press the AUDIO button.
The switcher's Audio LED remains lit and the Video
LED goes off.
3 . Press the 5 button to select input 5. The switcher displays
the tied outputs as described in the switcher’s manual.
4 . Allow the switcher’s 5-second input and output button
timeout to deselect the input.
View a tie by output selection
1 . Press the OUTPUT button to specify an output to view the
tied input. The switcher's Video LED lights and the Audio
LED lights (or blinks if audio is broken away).
To view video and audio ties, skip step 2.
2 . If desired , specify video-only or audio-only to view:
a . To view video-only tie(s) , press the VIDEO button.
The switcher's Video LED remains lit and the Audio
LED goes off.
b . To view audio-only tie(s) , press the AUDIO button.
The switcher's Audio LED remains lit and the Video
LED goes off.
3 . Press the 3 button to select output 3. The switcher
displays the tied input and other outputs tied to that input
as described in the switcher’s manual.
4 . Allow the switcher’s 5-second input and output button
timeout to deselect the output.
Presets
Save a preset
1 . Create all desired ties.
2 . Press the SAVE button to specify a save preset operation.
3 . Press the PRESET button to specify preset mode. The
switcher's Preset LED blinks and, for preset numbers that
are within the switcher’s total number of inputs and
outputs, the Input or Output LEDs` associated with existing
presets light.
If you save the current configuration to an existing preset,
that preset’s configuration will be overwritten.
4 . Press the 5 button to select preset 5. The current
configuration is saved as preset 5.
Recall a preset
1 . Press the PRESET button to specify preset mode. The
switcher's Preset LED lights and, for preset numbers that
are within the switcher’s total number of inputs and
outputs, the Input or Output LEDs associated with existing
presets light.
2 . Press the 8 button to select preset 8. The ties that are
saved as preset 8 become the current configuration.
Mutes
Mute an output
1 . Press the MUTE button to specify a mute operation.
To mute video and audio output, skip step 2.
2 . If desired , specify video-only or audio-only to mute:
a . To mute the video output , press the VIDEO button.
The switcher's Video LED remains lit and the Audio
LED goes off.
b . To mute audio output , press the AUDIO button. The
switcher's Audio LED remains lit and the Video LED
goes off.
3 . Press only one I/O button ( 1 through 8 ). The switcher’s
associated Output LED flashes on for a second.
You can mute multiple outputs, but you can only perform
the mute operation on one output at a time.