Epson V4.22 - Manual (Page 26)

25 Monitoring window layout
f Displaying projector properties
Right-click on a projector icon in "Grouping view" or "Detail list view"
and select "Property".
Displaying and deleting logs
In your web browser, you can check a transmission log of content such as
what has been controlled by the EMP Monitor, projector errors. You can
delete logs once you have checked them.
f Displaying logs
PROCEDURE
Select "Log" - "show" from the "View" menu.
The web browser will open and the communication logs up until that
time will be displayed.
f Deleting logs
PROCEDURE
Select "Log" - "Delete" from the "View" menu.
When the confirmation message is displayed, click [OK].
All logs will be deleted and details of EMP Monitor control
operations and details of projector errors from that point onward will
be recorded in a new log.
Displays the
projector firmware
version.
TIP
When "Log output" is set to "On" at "Environment setup" in the
"Tool" menu, transmission logs are stored. The default setting is
"Off".