Epson CX7000F - Manual (Page 39)

Receiving a Fax 39
If you need to fax another page, press the 1 key (for Yes). Open the document
cover, remove your first original, place your next original, and close the
document cover. Then press the x
Start Color/OK button to fax the next
page. Repeat this step to fax all the necessary pages.
Note:
If you’re sending a color fax, or a large document that fills up the memory area, the
CX7000F Series scans and faxes one page at a time. It then asks if you want to
send another page. The fax connection stays open until you are finished.
Receiving a Fax
The CX7000F Series automatically receives and prints faxes in Auto Answer
mode. However, you may want to receive faxes manually if you connected the
CX7000F Series and a phone or answering machine to a phone line that also
receives voice calls. Then you can check for a fax tone from the sending fax
machine and press a button on the CX7000F Series to receive the fax, or allow
your answering machine to determine if the call is an incoming fax.
Note:
Make sure you selected the Paper Size
setting that matches the size of paper you’ve
loaded. If the incoming fax pages are larger than the paper size you loaded, the fax size
is reduced to fit or printed on multiple pages, depending on the Automatic Reduction
setting you select. See page 32 for details.
Selecting the Answer Mode
The CX7000F Series tells you whether Auto Answer
is turned on or not on the first screen:
To change the answer mode, press the Auto Answer
button. The Y or N changes on the screen. Press
Auto Answer again to change it back.
Note:
You can select the number of rings that must occur before the CX7000F Series
receives a fax using the Rings to Answer setting. See page 32 for details.
12:00 PM Y
Y: Auto Answer is turned on
12:00 PM N
N: Auto Answer is turned off