Electrolux E4401-5 - Manual (Page 52)

What to do if … 52
What to do if …
If you are unable to remedy the problem by following the above sugges-
tions, please contact your dealer or the Customer Care Department.
1
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
3
If the appliance has been wrongly operated, the visit from the customer service
technician or dealer may not take place free of charge, even during the warranty
period.
Problem Possible cause Remedy
The cooking zones are not
working
Consult the instruction manual for the built-in range
The oven does not heat The oven has not been
switched on
Switch the oven on
The required settings have not
been made
Check the settings
The domestic electrical protec-
tion device (fuse) has been
tripped
Check the fuses or protection
devices.
If these are tripped repeatedly,
you should call a qualified
electrician.
“F2” appears in the display The meat probe plug is not fit-
ted properly into the socket
Insert the meat probe plug as
far as it will go into the socket
on the side wall of the oven.
The oven light does not come
on
The bulb has blown Replace the bulb