Everpure Insurice Filter Systems EV3112-81 - Manual (Page 3)

cArtridge chAnge procedure
everpure carbon filter cartridge
change
1. Shut off power to equipment. Shut
off inlet water ahead of system.
2. Open flushing valve to relieve
pressure.
3. Hold head firmly and push upward.
Turn cartridge to left until it stops.
4. Pull cartridge downward and out of
head.
5. Hold head firmly. Align cartridge
lug with label. Insert new cartridge
firmly into head.
6. Turn cartridge right 90˚ until
rotation stops.
7. Repeat steps 3-6 for remaining
cartridges.
flushing
8. With flushing valve fully open, open
inlet water at full force for five
minutes. Close flushing valve.
9. Turn on power to equipment
preSSure gAugeS
Low Inlet
Pressure
Adequate Inlet
Pressure
Low Outlet
Pressure
Adequate Outlet
Pressure
for installations in Massachusetts, the commonwealth of Massachusetts plumbing code 248 cMr shall be adhered to. consult your licensed
plumber for installation of the system. this system and its installation must comply with state and local regulations.
replAceMent pArtS
Contact your local Everpure dealer for filter cartridges or system
replacement parts.
description part number
Outlet pressure gauge EV3114-09
Inlet pressure gauge (quad only) EV3114-09
Inlet valve (twin, triple & quad) EV3114-07
Flushing valve EV3114-07
System Tested and Certified by NSF International against
NSF/ANSI Standards 42 and 53 for the reduction of:
Standard No. 42 —
Aesthetic Effects
Chemical Reduction
Taste and Odor
Chlorine
Mechanical Filtration
Particulate Class I: 99.2% reduction of particles
one-half micron and larger in size
Standard No. 53 —
Health Effects
Mechanical Filtration
Turbidity (i2000, i2000 2 Only)
Cyst
Asbestos (i2000, i2000
2 Only)