Echo PB-755S H - Manual (Page 22)

22
A
Cleaning Cylinder Fins
1. Remove spark plug lead from spark plug, and remove engine
cover (4 screws).
2. Clean cylinder fins (A) to allow cooling air to pass freely.
3. Install engine cover and attach spark plug lead.
EXHAUST SYSTEM
Spark Arrestor Screen
Level 2.
Tools required: Cross Head Screwdriver
Parts Required: Spark arrestor screen, Gaskets
WARNING
Do not perform maintenance on engine or muffler until engine and
muffler are completely cool, otherwise serious personal injury may
result.
IMPORTANT
Carbon deposits in muffler will cause a drop in engine output and
overheating. Spark arrestor screen must be checked periodically.
1. Remove spark plug lead from spark plug, and remove engine
cover (4 screws).
2. Remove spark arrestor covers (A), gaskets (B), and spark
arrestor screen (C) from muffler. Replace screen if plugged
with carbon deposits.
NOTE
When cleaning carbon deposit, be careful not to damage the
catalytic element inside muffler.
3. Install spark arrestor screen and cover.
4. Install engine cover and attach spark plug lead.
A B
C