Epson 3260 - Manual (Page 77)

All the text is printed on the same line.
Set the auto line feed to on in the default-setting mode so the
printer adds a line-feed code to each carriage return. See
“Changing the default settings” on page 3-7.
The text is printed with extra blank lines between the lines of text
Two line-feed signals are being sent. Set the auto line feed to
off in the default-setting mode. See “Changing the default
settings" on page 3-7.
Line spacing is incorrect. Adjust the line-space setting in your
application software.
Page length does not
match the
length of the paper.
Check the page length set by your application software and
adjust it if necessary.
If you are using continuous paper, change the page length in
the default-setting mode. See “Changing the default settings”
on page 3-7.
Regular gaps occur in the printout.
One-inch ship over perforation may be set. Set the skip over
perforation to off in the default-setting mode. See “Changing
the default settings” on page 3-7.
Vertical printed lines do not align.
Set the graphic print direction to Unidirectional for
unidirectional printing in the default-setting mode. For
instructions, see “Changing the default settings” on page 3-7.
Using the Printer 3-21