Euro-Pro EP484 - Manual (Page 13)

13
TO EMPTY THE IRON
• Always empty iron after each usage.
• After using the iron, turn the variable steam control to ‘0’ and the temperature
control dial to ‘minimum’.
• Unplug the iron from the power source.
• Set variable steam control to ‘MAX’.
• Open the water inlet cover and turn the iron up-side down over the sink with
the tip pointing downward and allow the water to flow from the opening.
• Set variable steam control to ‘0’.
• Allow iron to cool on the iron rest before storing.
WARNING: Use caution when you turn the iron up-side down - there may be hot water in the
reservoir. Burns can occur from touching hot metal parts, hot water or steam.