Epson P-6000 - Manual (Page 12)

❏ Use only an Epson Lithium-ion battery for the viewer according to the directions in the user
documentation.
❏ You can use the following two methods to charge the battery. Connect the viewer (Model: G971A/
G971B) and the AC adapter (Model: A351H). Place the battery in the battery charger (Model:
EU-217).
❏ Do not use the battery that comes with the viewer for other devices.
❏ To protect against short-circuiting, do not remove the outside case of the battery.
❏ Do not handle the battery with wet hands or use them near water.
❏ Do not expose the battery to water or high humidity.
❏ Do not drop, puncture, disassemble, mutilate, or short-circuit the battery.
❏ Do not place the battery near or into fire or water.
❏ Do not use batteries that are leaking or damaged in any way.
❏ Do not charge the battery using devices except for this product or the specified battery charger
(Model: EU-217).
❏ Do not use, charge, or leave the battery near an open flame or in a very hot location with a
temperature of 35°C or above.
❏ Keep batteries away from heat sources.
❏ Do not leave the battery in a vehicle, to prevent the battery from overheating.
❏ Do not insert objects into any openings as they may touch dangerous voltage points or
short-circuit components.
❏ Prevent the battery from coming into contact with metal objects that could short-circuit it, such
as coins or keys.
❏ Do not insert the battery into power outlets or other power sources such as car cigarette lighter
sockets.
❏ Do not solder wires or terminals directly to the battery.
❏ Do not touch battery terminals.
❏ Keep batteries away from open flame if they leak or smell strange.
❏ If overheating, discoloration, or distortion occurs, remove the battery from the viewer and do
not use it.
R41A0K180 User’s Guide
Safety Instructions 12