EdgeStar Upright Refrigerator - Manual (Page 2)

2
INSTALLATION AND OPERATION
Place your appliance in a location that is strong
enough to support its total weight, keeping in mind
that it will weigh substantially more when fully
loaded than when empty.
In order to prevent vibration and noise, the
refrigerator should be leveled by adjusting the front
leveling legs.
Please note that this appliance is designed for
“free-standing” use only. Choose a well ventilated
location with at least 2-3 inches of clearance
around the appliance.
Locate the appliance out of direct sunlight and
away from heat sources such as an oven or boiler.
For your safety, please read the following
nformation i
Warning: This appliance must be installed on a
circuit that is grounded.
Operation
Before plugging in your refrigerator for the first
time remove all packaging, clean the refrigerator
with a soft rag and a mixture of lukewarm water
and baking soda (2 tablespoons baking soda in 1
quart of water works well) . Wipe dry with soft
loth. c
Temperature Control
The temperature in the appliance is controlled by