Elite Screens ELITE EZ CINEMA SERIES F84NWH - Manual (Page 6)

Preparing screen for storage
1. Pulling down the screen:
First, hold the telescoping support rod with the left hand and loosen the locking sleeve counter-clockwise
with the right hand. Then shorten the telescoping support rod slowly into the full retracted position and
tighten the locking sleeve to secure it in place.
2. Retract the screen:
Remove the pull hook from the support bracket by lifting it about 2 cm up and then hold on to the pull
hook and lower the screen gently into the box.
3. Pulling out the support rod:
After telescoping the small supporting rod to its shortest position and tightening the locking sleeve, take
out the supporting rod from the support plate.
Rev. 1.0