Eurotech Appliances CPU-1461 - Manual (Page 33)

PC/104-Plus – CPU-1461 Module 33
Primary and secondary EIDE
This option enables or disables the on-board EIDE hard disk controllers. For example, if an external hard
disk controller needs to be used, the internal one must be disabled.
Option Description Note
Disabled Disable the on-board hard disk controller An external controller can be used
Enabled Enable the on-board hard disk controller
Video Controller
The on-board Video Controller can be automatically disabled if another one is found in the system; otherwise
the on-board video controller can be forced anyway, even if another controller is present.
Option Description Note
Replace with Add-On if any If an external controller is found, it is used
Always use Integrated In any case the on-board controller in used
AC97 Controller
The on board AC97 controller can be enabled or disabled
Network
In PCI system the user can manually enables or disables the on-board network adapter.
Option Description Note
Disabled Disable the on-board network controller
Enabled Device only Enable the on-board network controller
Enabled device and Firmware Enable the on-board network controller
and the Firmware in order to allow the boot
from network
PS/2 Mouse
If not used, the PS/2 mouse can be disabled. In this way the interrupt IRQ 12, normally reserved for mouse,
is free for PCI bus or other devices.
• Note: the interrupt reserved for mouse is fixed (IRQ 12); it is displayed for information only.
Option
Description Note
Disabled Disable the on-board mouse controller
Enabled Enable the on-board mouse controller
Bridge MAC Address
This option allows configuring the hexadecimal values of the Bridge MAC Address.