Ericsson GA628 - Manual (Page 27)

Resetting a
Call Meter
1. Select the Info menu.
2. Scroll to the meter option you want to reset
and press YES .
3. Press YES at the reset prompt.
Other Networks
This chapter describes how you select a different network when you are out of range of your
home service provider’s network.
About Choosing
Network
When you turn on the phone, it selects its home
network. If this is not within range, you might
not be able to get any reception or, if you are
abroad, you can choose a different network, pro-
vided your service provider has an agreement al-
lowing you to use the network. This is called
roaming.
When you select the Networks menu, the phone
automatically searches for all networks present
in the area you are in. Each network that is
found, has a status indication telling you
whether the network is available or forbidden.
See the list below for a description of the status
indication:
Display: Meaning:
Network and # home network
Network and * currently used network
Network and A other available networks
Network and S other available network (given
priority by your home service
provider)
Network and F forbidden networks
Auto automatic network search
Note!
The status of forbidden networks can change, so
it is important that you make a network search
to update the list, especially when you are visit-
ing another country.
Auto is the basic setting for the network search
and selection. This setting means that your
phone takes care of all the network search and
selection.
Selecting a Network
1. Select the Networks menu.
The phone performs a network search and the
display shows the current network followed
by the network list.
2. Scroll through the network list to see which
networks are available.
3. Press YES to select a network.
When you have made a network selection,
Networks? is shown whenever the phone
cannot contact the desired network. You can
now either:
● Select a new network.
● Set the phone to the automatic search mode.
EN
LZT 126 1352/7 R1A 21