Eclipse - Fujitsu Ten CD5423 - Manual (Page 24)

24
Basic operation
Adjusts treble level.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes high sounds.
Turn to the left:
Softens high sounds.
TREB (TREBLE) Mode
Various audio control modes may be fine-tuned using this
procedure.
Modes will switch in the order shown below each time the
button is pressed.
Switching audio control modes
Press the [AUDIO CONTROL] button for less than one
second to select the item to be adjusted. 1
[AUDIO CONTROL] button
Adjusts volume.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left:
Decreases the volume.
VOL (VOLUME) Mode
Adjusts bass level.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes low sounds.
Turn to the left:
Softens low sounds.
BASS Mode
VOL BASS* TREB* BAL FAD NON-F
*: These mode cannot be adjusted when the Hide-Away EQ/DSP
Sound Processor (2301) is connected.