Elo TouchSystems 1746L - Manual (Page 16)

Optimizing the LCD Display
To ensure the LCD display works well with your computer, configure the
display mode of your graphic card to make it less than or equal to 1280 x 1024
resolution(1280x1024 is highly recommended), and make sure the timing of the
PC video graphic card is compatible with the LCD display. Refer to Appendix A
for more information about resolution. Compatible video modes for your
touchmonitor are listed in Appendix C.
VESA Mount on Your Touchmonitor
Your touchmonitor conforms to the VESA Flat Panel Monitor Physical
Mounting Interface (FPMPMI™) Standard which defines a physical mounting
interface for flat panel monitors, and corresponding standards for flat panel
monitor mounting devices, such as wall and table arms. The VESA mounting
interface is located on the back of your touchmonitor.
To use the VESA mount, simply mount to either 75mm or 100mm VESA mount.
Use M4x7mm machine screws. Do not penetrate the screw into the monitor more
than 7mm.
2-12 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e