Eagle Electronics IntelliMap 640C User Manual

Page 65

Advertising
background image

59

2. Press

↑ to

N

EW

R

OUTE

, then press

ENT

. To add to an existing route,

press

↓ or ↑ to route name|

ENT

.

Edit Route menu (left). Edit Route Waypoints menu (right)

with Add From Map command selected.

3. Press

↓ to

E

ND OF

R

OUTE

|

ENT

|

↓ to

A

DD

F

ROM

M

AP

|

ENT

. The Map Page

appears with the cursor showing.

4. Use the Zoom and arrow keys to move the map and cursor until the
cursor is centered on the spot where you want your route to begin.

5. To set the first route waypoint press

ENT

. In the example below, we

moved to the entrance of the cove where our boat was docked.

Route creation sequence (from left): Fig. 1. Set route waypoint (1) at

the cove entrance. Fig. 2. Move cursor northeast to set point (2) at

channel entrance. Fig. 3. With point (2) set, move cursor southeast to

mark channel exit with waypoint (3). In figures 2 and 3, notice the

rubber band line extending from the previously set waypoint to the

cursor. This line will become the course for the route

2.

3.

1.

Advertising