Eiki LC-XB27 - Manual (Page 28)

28
Basic Operation
black out
➜ the captured image ➜ normal ➜
• • • • •
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When a projected
image is captured and set as “User” in the Logo selection
(p48), the screen changes each time you press the NO
SHOW button as follows.
The message will disappear after 4 seconds.
NO SHOW button
Press the P-TIMER button on the remote control. The timer
display “00 : 00” will appear on the screen and the timer
will start to count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. Press the
P-TIMER button again, then the P-timer display will
disappear.
P-TIMER button
P-Timer display
Press the IMAGE button on the remote control to select a
desired image level of the screen.
For more detail, see p35, 42.
IMAGE button
✔
Note:
See the previous page for the other buttons.
Remote Control
NO SHOW
button
P-TIMER button
IMAGE button